View Single Post
  #42   IP: 162.253.71.237
Old 09-10-2020, 10:35 AM
idreamOfSailing idreamOfSailing is offline
Senior Member
 
Join Date: Jun 2018
Posts: 37
Thanks: 7
Thanked 0 Times in 0 Posts
I know the choke functions correctly because I did that myself, ordering the replacement cable from moyer then checking through the hole where the flame arrestor goes when installing it.

You are right, I don't have a manual though I have scoured the net for videos, which I find more helpful than pictures.

Then of course there's this forum which has so far been very patient.

If removing the carburetor isn't that difficult (it's really tight on the boat and half the time I'm working blind, feeling where bolts and such are or working with the aid of a mirror) then I may remove it personally to verify the work done. But first I will try adjusting screw settings and checking for ignition problems as mentioned before. I want to be certain it's not the carb before I try to remove it.
Reply With Quote