View Single Post
  #40   IP: 162.253.71.237
Old 09-10-2020, 09:29 AM
idreamOfSailing idreamOfSailing is offline
Senior Member
 
Join Date: Jun 2018
Posts: 37
Thanks: 7
Thanked 0 Times in 0 Posts
I had it "professionally" rebuilt so assuming it was done correctly.

Q1: is there fuel in the carburetor bowl, yes or no? How do I check for that?
Q2: is the idle air adjustment screw pre set at the default position, 1½ turns off the seat? I will check that. I assume the default position is screwed in all the way?
Q3: is the choke closing fully? Yes.
Q4: are the carburetor halves seated together properly? Looks okay.
Q5: is the carburetor properly mounted to the manifold flange? Looks okay.
Q6: have you kept the raw water intake thru-hull closed during no-start cranking? She's on the hard so no need?
Reply With Quote