View Single Post
  #23   IP: 138.88.62.64
Old 01-03-2013, 11:18 PM
sastanley's Avatar
sastanley sastanley is offline
Afourian MVP
 
Join Date: Sep 2008
Location: Solomons, MD
Posts: 7,016
Thanks: 1,134
Thanked 600 Times in 442 Posts
Question

jb...My boat (#511) and Neil's boat (#600) are of similar vintage..both '77. I can't recall if you had posted previously what hull # yours is.

The two galley drawers to port of the stairs are easy to remove...the frame generally has 4 sheet metal screws into fiberglass..also easy..this gives you enough access to stick your head and a big light in there. Have you tried that yet?

Based on Neil's description, I would guess Catalina made these "harnesses" in 6'-8' lengths..as they went to longer runs, they just added another length(s) of harness..I had two short runs (at the engine and gauge pod) with a 6'-8' run in the middle..add a wheel and an aft gauge pod and it could be two or more sections..

Just throwing it out there for things to look at...I have no positive data on this.
__________________
-Shawn
"Holiday" - '89 Alura 35 #109
"Twice Around" - '77 C-30, #511 with original A-4 & MMI manifold - SOLD! (no longer a two boat owner!!)
http://www.moyermarine.com/forums/signaturepics/sigpic3231_6.gif
Reply With Quote