View Single Post
  #12   IP: 98.206.214.37
Old 05-17-2012, 06:22 PM
CraigRun's Avatar
CraigRun CraigRun is offline
Member
 
Join Date: Mar 2012
Location: Chicago, Illinois
Posts: 3
Thanks: 0
Thanked 3 Times in 2 Posts
Thanks

Thanks Greidy for the PDF, it really helps.

Looking at the photo I can tell I didn't do the reverse adjustment properly.

It really would be helpful if somebody could put your PDF in a sticky along with Don's forward and reverse adjusting mode text that I quoted above. A picture's worth a thousand words as they say.

I added some more photos of our custom cable clamp setup to the photo album so folks can better see what it looks like. It was very carefully machined to put just the right amount of pressure on the cable.

I'm going to give our existing setup with the 33C cable one more try, but if it doesn't work, then we're going to have to go with the bigger cable that folks mentioned.
Reply With Quote
The Following User Says Thank You to CraigRun For This Useful Post:
TimBSmith (10-04-2023)