The inner wire for the choke is not connected to the dohicky on the choke; it appears to be resting on the part itself. The engine will not start unless it is choked, especially when cold.
To review: To start the engine needs fuel, spark, compression
in the cylinders. Also the choke must be working and the spark needs to be at the right time (timing).
The raw cooling water intake valve in located on the hull of the boat at the other end of the water pump inlet hose. When you crank the engine the water pump is turning and pumping water. Exhaust pressure will blow this water out when the engine is running. When the engine isn't running water can accumulate in the exhaust system and flood back into the engine if the engine is no start cranked for to long of a period of time.
A BELATED WELCOME TO THE FORUM. We'll get your engine running. Hang in there.
ex TRUE GRIT
Edit: Jerry beat me to it with some excellent pictures
Last edited by JOHN COOKSON; 07-03-2021 at 10:31 AM.
|