View Single Post
  #1   IP: 108.51.19.207
Old 05-16-2021, 09:42 PM
svsonora svsonora is offline
Senior Member
 
Join Date: Sep 2020
Location: Washington DC area
Posts: 20
Thanks: 1
Thanked 7 Times in 2 Posts
Reverse keeps going out of adjustment

I bought the excellent service manual from moyer marine, and followed the adjustment procedures do the dot. I adjusted forward, then reverse. I had a good 2 inches left on the rear movement of the transmission lever at the engine as it started to engage, seemed to be safely fully engaged at the rearmost travel.

The problem is, after a day of sailing (motoring out of my harbor and the channel, then going back in), my reverse is gone. Nothing whatsoever when I move the cockpit lever back. I clearly had reverse when I backed out of the slip earlier today.

I've been wrestling with this problem for a few years.

Do I need a new transmission cable? What do I need to do?

By the way, my retaining clip is intact.
__________________
1975 Bristol 30 Sonora del Viento
Reply With Quote