Thread
:
Shifting is not finding neutral
View Single Post
#
3
IP: 24.34.54.47
06-26-2012, 06:43 AM
jhwelch
Senior Member
Join Date: Dec 2005
Posts: 476
Thanks: 0
Thanked 6 Times in 6 Posts
Another reason for needing to "jiggle" is the clamp holding your shift cable inside the pedestal may be slipping. There should be a tightening screw somewhere near the shift lever; make sure it has not backed out a little bit.
jhwelch
View Public Profile
Find all posts by jhwelch