View Single Post
  #6   IP: 98.171.162.132
Old 02-06-2015, 01:31 AM
JOHN COOKSON JOHN COOKSON is offline
Afourian MVP, Professor Emeritus
 
Join Date: Nov 2008
Posts: 3,500
Thanks: 54
Thanked 855 Times in 629 Posts
As best I recall the seals are installed so the numbers or writing on the seals each face each other. The first seal is pressed in so you can read the numbers.The last seal is pressed in so you can't read the numbers. This way the numbered sides end up facing each other. If no one comes along and confirms this call MMI and ask Ken about the proper orientation before proceeding. Or search in the forum for proper seal orientation.
If you put the seals in the freezer and carry them to the work area between a couple of cakes of blue ice it will make them easier to start squarely.

TRUE GRIT
Reply With Quote