View Single Post
  #3   IP: 24.77.14.90
Old 06-19-2013, 06:05 PM
Chuck Dyck Chuck Dyck is offline
Senior Member
 
Join Date: Jul 2010
Location: Winnipeg, Manitoba, Canada
Posts: 17
Thanks: 1
Thanked 1 Time in 1 Post
Quote:
Originally Posted by Antibes View Post
You will need to reset it. IIRC the starting point is 3/4 turns out. Then adjust from there
I want to make sure I will be doing this right.
Warm up the engine.
Put it under load.
Set it to cruising RPM.
Turn the mixture screw to get max RPM.
Reset the idle.

Is this the complete procedure?
Chuck
Reply With Quote