View Single Post
  #15   IP: 76.119.124.162
Old 06-19-2010, 08:12 PM
fvigeant fvigeant is offline
Senior Member
 
Join Date: Apr 2008
Posts: 65
Thanks: 0
Thanked 0 Times in 0 Posts
Don (or anyone else) is there any reason to preserve the wrieing harnesses? It seems the MMI wiring kit eliminates them... and they are the source of so many issues... i noticed this year that water from a bad seal on one of my instrument gauges worked its way down to the wiring harnesses and has since caused corrosion on both harnesses (leading to instrument panel and engine) to the point the corossion has caused enough resistance thet there is evidence of melting on on of the harnesses. Now.... it seems the easiest thing is to cut out both harnesses and splice all the wires together and shrink wrap them so everything is Kosher. It seems liek the wiring harness is useless unless you are removing the engine and the harness leading to the instruments seems equally useless given the frequency of removing the entire instrument panel. Is eliminating these harnesses an issue?
Reply With Quote