View Single Post
  #22   IP: 192.182.133.60
Old 05-15-2019, 08:09 PM
infy infy is offline
Senior Member
 
Join Date: May 2019
Posts: 63
Thanks: 0
Thanked 4 Times in 4 Posts
That helps!

I removed the valve cover to check on the valves. It's tricky to turn the engine over and record a video of it. I just have some photos for now. The valves look... ok. I'll try turning the engine over and record a video.

Keep in mind that all 4 cylinders have no compression. So if it's something wrong with the valves, it must be wrong on all of them. Which seems.... unusual. But I suppose it's possible.

I'm going to remove the exhaust manifold and also see if I can manage to get the cylinder head off.
Attached Images
  
Reply With Quote