Quote:
Originally Posted by thatch
If the roller is missing, there are two ways to remove and replace the brake band adjusting bolt. One method is to remove the upper half of the reversing gear housing, which involves considerable disassembly, or to use the "Kaminsky" method. It is described in detail in the "tech tips" section, and really is the more logical way to remove the bolt/roller assembly. If you look in the parts section, you will notice that all of the Moyer supplied housings and engines have this really cool mod.
Tom
|
You can see evidence of the Kaminksy mod
here, on the port side of the housing in a Moyer rebuild.
Bill