View Single Post
  #26   IP: 24.61.95.61
Old 03-24-2020, 08:57 AM
ArtJ ArtJ is offline
 
Join Date: Sep 2009
Posts: 2,148
Thanks: 208
Thanked 57 Times in 45 Posts
Quote:
Originally Posted by jcwright View Post
Art,

I've attached an updated drawing of the T34C spreader, this time including the cross-sections that were missing from the earlier file.

Jack.
Jack

Is it possible to add the orientation of the slot for the stay with regard
to the mounting holes in order to know whether the holes are vertical or horizontal when mounted to the mast?
This helps in determining the direction of wear.

Thanks

art

Last edited by ArtJ; 03-24-2020 at 08:59 AM.
Reply With Quote