View Single Post
  #5   IP: 24.116.189.19
Old 01-20-2021, 12:19 AM
Truchero Truchero is offline
Senior Member
 
Join Date: Dec 2020
Posts: 11
Thanks: 1
Thanked 0 Times in 0 Posts
Thanks for the replies that I unfortunately knew were coming. I brought both propellers home and side by side they are nearly identical in size (12 in).
I don’t know. I would have had to purchase a bushing anyhow (the brass one is for a 1” shaft, the boat has a 7/8” shaft). Here’s a pic of the props and a close up of the crack on the composite prop foR curiosity purposes.

I’m going to window shop on eBay to see what I find. Maybe a 3 blade prop? Who knows!

I’m in the process of sanding the whole boat down to repaint. I’ve repaired a significant amount of core and bulkhead rot, and filed a few thru holes. I also had to buy a main sail. I was just hoping to avoid having to buy a prop as well. Hopefully the engine is fine! I’m sure I’ll soon become a regular around these parts. Thanks again for the detailed info!
Attached Images
  
Reply With Quote