View Single Post
  #1   IP: 24.119.211.241
Old 01-19-2021, 04:22 PM
Truchero Truchero is offline
Senior Member
 
Join Date: Dec 2020
Posts: 11
Thanks: 1
Thanked 0 Times in 0 Posts
Prop size for Pearson Renegade 27?

What propeller size should I use with a Pearson Renegade 27 with the A4 engine? It's at a boatyard and I have never handled it under power. It came with a composite propeller installed, and also a 13x11 Michigan two blade brass prop in storage. The composite prop on the shaft is cracked. It has no numbers but it is significantly smaller than the brass one.

I initially planned to replace the broken one with the 13x11, but it seems like it would be too big for the low rpm engine. Any ideas? Can I get away with it? The boat has a 21' waterline and around 7k bare displacement.
Reply With Quote