Moyer Marine Atomic 4 Community - Home of the Afourians

Moyer Marine Atomic 4 Community - Home of the Afourians (
-   Helpful Videos (
-   -   Startup after rebuild (

W2ET 11-03-2020 01:05 PM

Startup after rebuild
Click here for an interesting YouTube video on starting up an A4 after a rebuild.

Follow along and comment on how you might have done the troubleshooting to get the initial bugs out.

Note: This is not an MMI video, but rather a personal one which has received a lot of visibility on YouTube.


Al Schober 11-04-2020 12:27 AM

A no start condition after overhaul is frustrating - to say the least. My first rebuild (many years ago, not an A4) also had a no go condition.
Diagnostic tools? My favorite is a can of starting ether. It will tell you whether you're dealing with a fuel issue or a spark issue. Take it from there.

All times are GMT -4. The time now is 10:21 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2021, vBulletin Solutions, Inc.

Universal® is a registered trademark of Westerbeke Corporation

Copyright © 2004-2021 Moyer Marine Inc.

All Rights Reserved