Startup after rebuild
Click here for an interesting YouTube video on starting up an A4 after a rebuild.
Follow along and comment on how you might have done the troubleshooting to get the initial bugs out. Note: This is not an MMI video, but rather a personal one which has received a lot of visibility on YouTube. Bill |
A no start condition after overhaul is frustrating - to say the least. My first rebuild (many years ago, not an A4) also had a no go condition.
Diagnostic tools? My favorite is a can of starting ether. It will tell you whether you're dealing with a fuel issue or a spark issue. Take it from there. |
All times are GMT -4. The time now is 05:36 PM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Universal® is a registered trademark of Westerbeke Corporation
Copyright © 2004-2024 Moyer Marine Inc.
All Rights Reserved