Replacing raw water impeller
I am wondering if it would be worth it to fill my inlet side hose with water before attaching. That woul give me less time spinning a dry impeller. My last one lasted about 1 year. I did not lube it and it was shredded.
|
Adding the water won't hurt anything and may help depending on location to the waterline of the boat. Also a bit of Vaseline, grease or water pump lube on the impeller itself. Saves any rubbing until primed saving the impeller from a dry start.
Dave Neptune |
All times are GMT -4. The time now is 02:15 PM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Universal® is a registered trademark of Westerbeke Corporation
Copyright © 2004-2024 Moyer Marine Inc.
All Rights Reserved