Moyer Marine Atomic 4 Community - Home of the Afourians

Moyer Marine Atomic 4 Community - Home of the Afourians (https://www.moyermarineforum.com/forums/index.php)
-   ABYC and USCG Standards (https://www.moyermarineforum.com/forums/forumdisplay.php?f=86)
-   -   ABYC Marine Exhaust Standards (https://www.moyermarineforum.com/forums/showthread.php?t=9279)

ndutton 09-27-2015 11:07 AM

ABYC Marine Exhaust Standards
 
1 Attachment(s)
Attachment 11135 ABYC Article P-1 Exhaust Systems

Bayou Sailor 11-08-2020 05:28 PM

Thanks Neil,
 
I see that, but I just cant believe that carbon steel is recommended and not 304ss. oh well, I'll look at the cost of the 316 and if it's in the budget I'll use it. If not, I'll go back with cs.

ndutton 11-08-2020 06:41 PM

1 Attachment(s)
I agree with you, how can black iron be good but 304 stainless not but there it is on their table of materials nevertheless. McMaster-Carr carries Sch80 SS in 316L. If nothing else you can use them for price comparison.
https://www.mcmaster.com/pipe/thick-...ples-and-pipe/


All times are GMT -4. The time now is 11:23 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.


Universal® is a registered trademark of Westerbeke Corporation

Copyright © 2004-2024 Moyer Marine Inc.

All Rights Reserved