Moyer Marine Atomic 4 Community - Home of the Afourians

Moyer Marine Atomic 4 Community - Home of the Afourians (https://www.moyermarineforum.com/forums/index.php)
-   Introductions (https://www.moyermarineforum.com/forums/forumdisplay.php?f=50)
-   -   Hi! Pearson Renegade owner! (https://www.moyermarineforum.com/forums/showthread.php?t=11782)

Truchero 01-19-2021 04:12 PM

Hi! Pearson Renegade owner!
 
Hi all, I recently purchased a 1968 Pearson Renegade 27. I bought it out of the water sitting on a boatyard where I prepaid for three months. I'm on the second month of work. I bought the boat with the carburetor pulled, so I was not sure it would start. I rebuilt it and it started without hesitation. I ran it for a few seconds to avoid damage to the cutlass and raw water pump (hopefully). I'm about to tackle the engine and decided to join the forum for insight! Hopefully I'll be able to get some expertise and share some of my own experiences along the way.

The motor itself has a fresh water conversion, which is great. It also came with ample spare parts. I spoke with the previous owner and he did not know much about the motor. I get the feeling that the original owner babied the motor, but the last owner just ran it until the carb got clogged, or worse.... we shall see!

JOHN COOKSON 01-19-2021 05:41 PM

Get a bucket ( 5 gallon) supply water to it with a hose, put the the water pump intake hose into the bucket and start the engine out of gear. Prime the water pump first.
The prop sounds to large for the boat. Other experts will be along soon with more specific information.
Welcome to the forum.

ex TRUE GRIT

Truchero 01-20-2021 10:40 AM

Will do, I just got a ton of advise on the prop situation on another post. Thank you!

68PearsonRenegade 05-21-2022 11:29 PM

Hey, im new to the forum too and also am a 1968 renegade owner. I'm also doing an engine swap and a light rebuild on the swapped engine. feel free to reach out

ndutton 05-22-2022 10:18 AM

Welcome to the forum. We like pictures so don't be bashful.

Al Schober 05-22-2022 05:29 PM

If the carb clogged, I'd be suspicious of the fuel system. Pump a gallon out of the BOTTOM of the tank and see what it looks like. Check hoses and filters - both get old and require replacement. Be leery of any filters that a magnet will stick to! Finally, many of us have added a small pressure gauge at the carb inlet. Helps answer that 'Am I getting fuel' question.

68PearsonRenegade 06-25-2022 10:59 AM

Quote:

Originally Posted by Truchero (Post 124376)
Hi all, I recently purchased a 1968 Pearson Renegade 27. I bought it out of the water sitting on a boatyard where I prepaid for three months. I'm on the second month of work. I bought the boat with the carburetor pulled, so I was not sure it would start. I rebuilt it and it started without hesitation. I ran it for a few seconds to avoid damage to the cutlass and raw water pump (hopefully). I'm about to tackle the engine and decided to join the forum for insight! Hopefully I'll be able to get some expertise and share some of my own experiences along the way.

The motor itself has a fresh water conversion, which is great. It also came with ample spare parts. I spoke with the previous owner and he did not know much about the motor. I get the feeling that the original owner babied the motor, but the last owner just ran it until the carb got clogged, or worse.... we shall see!

Would you mind posting some pictures of the exhuast setup/ engine set up. Im working on a total A4 repower and refit on my renegade. It seems us renegade owners are a bit uncommon so we should help each other out


All times are GMT -4. The time now is 03:02 PM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.


Universal® is a registered trademark of Westerbeke Corporation

Copyright © 2004-2024 Moyer Marine Inc.

All Rights Reserved