Moyer Marine Atomic 4 Community - Home of the Afourians

Moyer Marine Atomic 4 Community - Home of the Afourians (https://www.moyermarineforum.com/forums/index.php)
-   O'Day (https://www.moyermarineforum.com/forums/forumdisplay.php?f=51)
-   -   Shift/Throttle Control (https://www.moyermarineforum.com/forums/showthread.php?t=7307)

benno 05-10-2013 07:54 PM

Shift/Throttle Control
 
My '76 Oday 27 needs a replacement for the shift/throttle control, dual lever.
Side mounted on the starboard side of the cockpit. Any thoughts on a source?

celtic sea 05-11-2013 09:04 AM

Hi, my shift / throttle controls on my Ericson 1973, 27' are ok, so I can't help with where to get new controls, but I could use the bracket on the back side that is mounting them. This is original to the boat so I don't think I could ever find one. Looks like I'll have to custom fab. one, unless someone has any idea on this.
John
Celtic Sea
E27. A4. 1973

ndutton 05-11-2013 10:06 AM

http://www.discountmarinesupplies.co...l_CH2500P.html
http://www.go2marine.com/item/162187...p-ch2500p.html
http://www.pricedumper.com/teleflex+...y=teleflex+mjb

If you have adventure in your heart you might consider this:
http://www.ebay.com/itm/DUAL-LEVER-S...c34fe6&vxp=mtr
and make a different connecting piece where the shift cable attaches to accommodate a 64C cable.

Buy and modify, cut to form and beat to fit.

CalebD 05-11-2013 02:43 PM

Wow! Those shift handles must be made of gold!

Since you are only looking for the support bracket I'd guess buying a new $600 set of controls will be your absolute last option.

It seems to me that with all the boats destroyed by h'cane Sandy that there must be some place where a lot of salvaged hardware ended up. I don't know if this outfit does that or not.
http://marinersmart.com/

Even paying a good metal fabricator to make you a new part would likely cost a lot less than the price of new.

25yearslater 06-09-2013 12:07 PM

I have the same situation on the same boat. I have the new Vetus SISCO unit and will be fabricating an adapter for the different shift length. Contol is 3" travel and the engine a 2" travel. Haven't been in too much hurry as I am more focused on sailing but will post my method soon.


All times are GMT -4. The time now is 04:49 PM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.


Universal® is a registered trademark of Westerbeke Corporation

Copyright © 2004-2024 Moyer Marine Inc.

All Rights Reserved