Moyer Marine Atomic 4 Community - Home of the Afourians

Moyer Marine Atomic 4 Community - Home of the Afourians (https://www.moyermarineforum.com/forums/index.php)
-   Cooling System (https://www.moyermarineforum.com/forums/forumdisplay.php?f=18)
-   -   oberdorfer - o-rings instead of seals? (https://www.moyermarineforum.com/forums/showthread.php?t=1976)

SimonP 10-14-2007 04:39 PM
oberdorfer - o-rings instead of seals?
 
I noted somewhere on this list some reference to using o-rings instead of the regular seals - was this for the oberdorfer? If so, can anyone offer me tips and/or specs?
thanks

tenders 10-14-2007 07:27 PM
"MMI Back Plate Kit"
http://www.moyermarine.com/cgi-bin/s...rebuilder.html

Replaces plate on Oberdorfer pump with one with a channel cut into it for an O-ring.

Also replaces flathead screws with thumbscrews.


All times are GMT -4. The time now is 07:05 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.


Universal® is a registered trademark of Westerbeke Corporation

Copyright © 2004-2024 Moyer Marine Inc.

All Rights Reserved