Moyer Marine Atomic 4 Community - Home of the Afourians

Moyer Marine Atomic 4 Community - Home of the Afourians (https://www.moyermarineforum.com/forums/index.php)
-   Testing Protocols (https://www.moyermarineforum.com/forums/forumdisplay.php?f=90)
-   -   Finding TDC the easy way (https://www.moyermarineforum.com/forums/showthread.php?t=11481)

ndutton 09-02-2018 10:57 PM

Finding TDC the easy way
 
5 Attachment(s)
A while back we had a tool concept for finding the compression stroke in a cylinder, critical when setting timing from scratch, without peering or inserting anything into the spark plug hole. Remember this?

Well it struck me as a pretty cool idea so I finally got around to making one and testing it out. I sacrificed an old spark plug by breaking off the porcelain, drilling out the electrode and grinding off the arm on the bottom, added a balloon to the top, threaded it into the #1 spark plug hole finger tight only and turned the engine over by hand. Once you know you're on the compression stroke you view the crankshaft roll pin for vertical alignment.

Way cool.


roadnsky 09-03-2018 12:40 PM

Neil-
IF you decide to mass produce...
can we have a variety of color choices on the balloons? :p

ndutton 09-03-2018 12:50 PM

1 Attachment(s)
Quote:

Originally Posted by roadnsky (Post 114220)
Neil-
IF you decide to mass produce...
can we have a variety of color choices on the balloons? :p

Yes, you may . . .

roadnsky 09-03-2018 12:52 PM

Quote:

Originally Posted by ndutton (Post 114221)
Yes, you may . . .

I'm ALL IN!

Sam 09-03-2018 07:38 PM

Very cool. Only thing I can add is that on this site you will either "learn" or get "entertained".

GregH 09-03-2018 08:25 PM

Quote:

Originally Posted by Sam (Post 114226)
Very cool. Only thing I can add is that on this site you will either "learn" or get "entertained".


And that is why they call it enterlearnment!
:D

CajunSpike 09-03-2018 09:15 PM

You must also consider the oxygen permability of the rubber as to the accuracy of the device. More or less rubber thickness may distort the results.









:-)

Yes I'm kidding.

ALMA 05-08-2020 12:32 PM

TDC
 
If a Vee drive prevents a visual of TDC there is a notch in the Accessory Drive that tells TDC too-

Administrator 05-08-2020 04:22 PM

I hope that forum members will appreciate the engineering complexities at work with Neil's device.
  1. The size of the balloon at various inflated pressures/volumes. A weather balloon won't work.
  2. The elasticity of the balloon. A stainless steel balloon won't work.
  3. The influence of color. Beyond my bachelor's degree in engineering.
  4. The influence of atmospheric pressure. Ditto.
  5. The influence of oxygen permeability, as pointed out by Spike. Way beyond.

All this stuff makes my head hurt, but kudos once again to Neil.

Bill

ndutton 05-08-2020 04:57 PM

On your last two considerations:

4. There is zero atmospheric influence on the indicator short of being in a perfect vacuum. It reads only the pressure delta above ambient created by the moving piston in a closed cylinder.

5. Nitrogen permeability would be a 4X greater concern considering the chemical composition of air.

Surcouf 05-08-2020 05:20 PM

for durability we would probably need to develop a balloon resistance test to Marvel Mistery Oil vapors too!

Al Schober 05-08-2020 05:20 PM

Since the air in the balloon has come thru the carb, it just might be flammable. Gives me all sorts of thoughts...

thatch 05-08-2020 05:26 PM

Probably shouldn't go there
 
Al, Have you ever heard of an acetylene bomb?
Tom

Dave Neptune 05-08-2020 06:11 PM

Tom, my dad made acetylene balloons for parties. Only he knew which ones were which on the patio. Mom would get mad so he'd blow one up near her and the laughs would start.

I did some torch silver soldering for a while. we had coffee cans on the bench with water for keeping our "prods" clean of flux. If someone was bothering me I would fill a can upside-down and when they'd come back to annoy me I'd wave the torch past a hole. After the second time I moved the fluorescent lights a foot or so.:o Lots of can dents over my bench!

Dave Neptune :cool:

thatch 05-08-2020 06:15 PM

Dave, I was pretty sure that you would have played with them.
Tom

Dave Neptune 05-09-2020 10:05 AM

Tom, I just could not resist :p.

Dave Neptune :cool:

joe_db 05-09-2020 12:33 PM

Quote:

Originally Posted by ndutton (Post 114206)
A while back we had a tool concept for finding the compression stroke in a cylinder, critical when setting timing from scratch, without peering or inserting anything into the spark plug hole. Remember this?

Well it struck me as a pretty cool idea so I finally got around to making one and testing it out. I sacrificed an old spark plug by breaking off the porcelain, drilling out the electrode and grinding off the arm on the bottom, added a balloon to the top, threaded it into the #1 spark plug hole finger tight only and turned the engine over by hand. Once you know you're on the compression stroke you view the crankshaft roll pin for vertical alignment.

Way cool.


That looks like a fun project :D It certainly will keep you from finding TDC on the exhaust stroke ;)

Al Schober 05-09-2020 10:29 PM

Well, this has been an amusing thread!
Just what I needed during this isolation. Spring trip to NOLA cancelled, instead we got to visit Loch Down. I hear that even Nessie is now in Loch Down.
So, all this is just to keep from putting your thumb over the spark plug hole?
No, the idea of acetylene balloons is new to me. Haven't tried one. Do they make your voice funny??
Another week or two of this and we can start a thread on vegetable guns. I've still got my potato cannon out in the shed - SpudZooka! I had the design for a radish pistol, but never made one.

ndutton 05-09-2020 11:04 PM

One thing I noticed with the balloon indicator - - you can turn the engine very slowly by hand and still get a good indication. Oh yeah, you can turn the engine with TWO hands.

joe_db 05-10-2020 02:31 PM

Quote:

Originally Posted by Al Schober (Post 121079)
Well, this has been an amusing thread!
Just what I needed during this isolation. Spring trip to NOLA cancelled, instead we got to visit Loch Down. I hear that even Nessie is now in Loch Down.
So, all this is just to keep from putting your thumb over the spark plug hole?
No, the idea of acetylene balloons is new to me. Haven't tried one. Do they make your voice funny??
Another week or two of this and we can start a thread on vegetable guns. I've still got my potato cannon out in the shed - SpudZooka! I had the design for a radish pistol, but never made one.

Acetylene balloons explode :D We made some at random torch settings when we were teenagers. Then we got the bright idea to use a big gallon jug and set the mix just right. My friend's father ended up falling off his chair on the front porch and further use of his welding tanks was curtailed :rolleyes:

ndutton 04-12-2023 10:50 PM

Interesting glitch
 
With this foolproof compression stroke indicator I recently performed a from-scratch timing exercise that was 180° out. Embarrassed, how could I have possibly messed up something as simple as this? I removed the spark plugs, installed the balloon indicator in cylinder #1, turned the crank by hand CCW facing the flywheel, balloon inflated, continued turning the crank until the roll pin was vertical, set the distributor rotor to #1. What could be easier?

Babbling in disbelief it took me an hour to figure it out. The engine had not run in a very long time, like years. The crank was not frozen, compression test showed good numbers on all cylinders, water jacket pressure test was successful so the conclusion was we had a viable block and air pump worthy of an effort to get her to run again.

After replacement and rebuilding of several components, with the coil wire removed I cranked for about 30 seconds to get some oil pressure without combustion. This cranking was done with the raw water intake thru-hull open. In a perfect world I would not have done that but the thru-hull valve was stuck open and I did not want to risk a bigger problem by breaking it trying to close. [Mis]setting the timing as described above followed.

It turned out that there was enough water in the waterlift muffler to seal off the muffler exit. This caused a backpressure to develop in the cylinder on the exhaust stroke thereby inflating the balloon indicator and a false result. I removed the water hose to the exhaust water injection fitting and extended it into a bucket to stop the waterlift from filling any more until I had the engine running. This also vented the exhaust so an accurate TDC could be determined and the timing reset.

I therefore recommend removing the water injection hose to vent the exhaust when using the balloon indicator to avoid the mistake I made.


All times are GMT -4. The time now is 04:57 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.


Universal® is a registered trademark of Westerbeke Corporation

Copyright © 2004-2024 Moyer Marine Inc.

All Rights Reserved