Return to the home page...

Go Back   Moyer Marine Atomic 4 Community - Home of the Afourians > Search Forums
Register FAQ Community Today's Posts Search

Showing results 1 to 25 of 35
Search took 0.01 seconds.
Search: Posts Made By: HalcyonS
Forum: Cooling System 06-21-2020, 04:58 PM
Replies: 21
Views: 4,469
Posted By romantic comedy
I ran the engine using the washdown hose as a...

I ran the engine using the washdown hose as a source of seawater just to see if it would work. it did.

Can also us the washdown hose to shoot thru the thru hull and try to clear the obstruction.
...
Forum: Cooling System 06-21-2020, 09:44 AM
Replies: 21
Views: 4,469
Posted By Al Schober
I've never been a fan of external strainers on...

I've never been a fan of external strainers on the water inlet. I've had blockages in the past, and been able to clear them by removing the inlet hose and pushing a piece of dowel down through the...
Forum: Cooling System 06-21-2020, 09:33 AM
Replies: 21
Views: 4,469
Posted By edwardc
Another old trick: If you have an open thru-hull...

Another old trick: If you have an open thru-hull (not one with a slotted cover), you can ream it open from the inside with a small piece of rebar.
Forum: Cooling System 06-21-2020, 09:25 AM
Replies: 21
Views: 4,469
Posted By Dave Neptune
I was motoring across the Catalina Channel one...

I was motoring across the Catalina Channel one winters day with my dog. About half way across the engine temp began to spike, :eek: no water! I spent the next hour or so trying to get the offending...
Forum: Cooling System 06-21-2020, 05:12 AM
Replies: 21
Views: 4,469
Posted By Peter
I was warming up my engine one day when the...

I was warming up my engine one day when the exhaust stopped spitting water. Took the cap off my winterizing tee and no water with thruhull open so must be plugged thruhull. Removed hose from...
Forum: Cooling System 06-21-2020, 02:11 AM
Replies: 21
Views: 4,469
Posted By JOHN COOKSON
You could try disconnecting a cooling system hose...

You could try disconnecting a cooling system hose somewhere at the midpoint of the water flow inlet -> to final outlet them start at that point and work back to the inlet or forward to the outlet...
Forum: Troubleshooting 06-18-2017, 11:38 AM
Replies: 15
Views: 5,149
Posted By ndutton
Troubleshooting is a process, not guessing

I've owned Kalina for 12 years now with no significant engine repairs and no indication any significant repairs were ever made by the PO. The engine has always started within a second or less of...
Forum: Fuel System 01-03-2017, 04:42 PM
Replies: 40
Views: 15,740
Posted By Tim
Here is the full article and summary chart from...

Here is the full article and summary chart from Practical Sailor.
Forum: Fuel System 01-03-2017, 09:48 AM
Replies: 40
Views: 15,740
Posted By joe_db
Practical Sailor tested all the common gas...

Practical Sailor tested all the common gas additives for dealing with long term storage issues. One of the issues was aluminum corrosion and Sea Foam was second best at preventing this. BioBor*...
Forum: Fuel System 01-01-2017, 04:42 PM
Replies: 40
Views: 15,740
Posted By joe_db
My aluminum fuel tank does not seem to suffer at...

My aluminum fuel tank does not seem to suffer at all. The last time I looked inside of it the metal was corrosion free.
The carb - not so much :(
The carb has - AFAIK - zinc, aluminum, brass, and...
Forum: Fuel System 01-01-2017, 10:56 AM
Replies: 40
Views: 15,740
Posted By Tim
Practical Sailor did a test on the H2Out several...

Practical Sailor did a test on the H2Out several years ago. Here is a PDF of the test.
Forum: ABYC and USCG Standards 12-27-2016, 09:49 AM
Replies: 2
Views: 6,985
Posted By joe_db
Here you go: ...

Here you go:
http://standards.sae.org/j1527_201102/

The marine fuel hose is all ethanol resistant and has been for some years. I never really dug into exactly how they tested it, but SAE...
Forum: Fuel System 12-24-2016, 11:44 PM
Replies: 40
Views: 15,740
Posted By joe_db
The rating system exclusively for marine hose is...

The rating system exclusively for marine hose is known as SAE J1527 and it provides for grades as follows:

A1--fuel feed hose; has a fire resistant cover; is designed to have fuel in the hose at...
Forum: Polls 12-13-2016, 07:48 AM
Replies: 50
Views: 55,056
Posted By Marian Claire
This may help. ...

This may help. http://www.moyermarine.com/forums/showthread.php?t=6148 The link in post #3.
Your boat is larger and heavier than the MC but I believe they are of similar construction. Wood, full...
Forum: Fuel System 12-05-2016, 05:44 PM
Replies: 61
Views: 16,382
Posted By 67c&ccorv
While my boat doesn't have an Atomic 4 in it I...

While my boat doesn't have an Atomic 4 in it I found a pretty good electric fuel pump (rated for 18,000+ hrs) that uses the same fuel pressure as needed in the A4.
...
Forum: Fuel System 12-04-2016, 08:24 PM
Replies: 61
Views: 16,382
Posted By ndutton
Many of those little filters have a check valve...

Many of those little filters have a check valve in them so flow is one direction only. If installed in the proper direction the air would not burp out toward the pump. If it's installed backwards ....
Forum: Fuel System 12-04-2016, 07:46 PM
Replies: 61
Views: 16,382
Posted By JOHN COOKSON
Did you visually verify that the choke was...

Did you visually verify that the choke was opening and closing like you expected it was?
Are the spark plugs wet with fuel after a period of no start cranking?

If you are feeding the filter from...
Forum: General Interest 11-28-2016, 08:02 PM
Replies: 4
Views: 3,744
Posted By edwardc
Even the V-drive ones. The V-drive reverses...

Even the V-drive ones. The V-drive reverses both the direction AND rotation of the shaft. These two reversals cancel each other out, and you still end up with a RH prop.
Forum: General Interest 11-28-2016, 10:18 AM
Replies: 4
Views: 3,744
Posted By Administrator
Don just confirmed to me that ALL A4 installs use...

Don just confirmed to me that ALL A4 installs use a RH prop.

Bill
Forum: General Interest 11-27-2016, 04:18 PM
Replies: 4
Views: 3,744
Posted By sailboatguy
Right hand props rotate clockwise to provide...

Right hand props rotate clockwise to provide forward thrust.....looking forward.
Forum: Fuel System 11-14-2016, 09:16 AM
Replies: 61
Views: 16,382
Posted By zellerj
How about Acetone

I agree that your monel tank in not the problem, but perhaps junk coating the tank is. How about getting a cheap plastic carboy and run off of that. Then drain your tank of gas and put a couple of...
Forum: Drive Train / Propellers 05-04-2016, 06:27 PM
Replies: 67
Views: 25,075
Posted By Dave Neptune
Shrek, the best way to choose a prop is to check...

Shrek, the best way to choose a prop is to check where you are with a tach and a reasonably well tuned engine. You should achieve red-line at WOT and be able to cruise in the intermediate ranges....
Forum: General Interest 04-16-2016, 06:54 PM
Replies: 10
Views: 4,164
Posted By ndutton
http://www.moyermarine.com/forums/showthread.php?p...

http://www.moyermarine.com/forums/showthread.php?p=86252#post86252
particularly post #12
Forum: Ignition System 01-01-2016, 10:06 PM
Replies: 44
Views: 185,004
Posted By hanleyclifford
Talking It's just a marketing company so forget customer...

It's just a marketing company so forget customer service and warranty, but at the price the risk is minimal (formerly Buy.com)
Forum: ABYC and USCG Standards 12-23-2015, 08:06 AM
Replies: 0
Views: 6,870
Posted By ndutton
Galvanic Series

Here is one of the better treatments on galvanic series I've seen. The second table with the voltage index is particularly useful and the third table is refined to marine related metals and alloys...
Showing results 1 to 25 of 35

 
Forum Jump

All times are GMT -4. The time now is 04:10 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.


Universal® is a registered trademark of Westerbeke Corporation

Copyright © 2004-2024 Moyer Marine Inc.

All Rights Reserved