#1
IP: 45.48.80.165
|
||||
|
||||
V Drive & Exhaust
Hello, I have a direct drive exhaust, came with a motor i bought and its parts box. It clearly wont work. Can i just build my own with a couple of 90 degree elbows to get the exhaust heading aft?
|
#2
IP: 155.186.124.219
|
|||
|
|||
Yes, a couple of "black iron" elbows should do fine. Just don't inject the water to close. Galvanized can cause nasty gasses as the galvanize (zinc) burns off.
Dave Neptune |
The Following User Says Thank You to Dave Neptune For This Useful Post: | ||
Peter (06-07-2020) |
#3
IP: 100.36.65.17
|
||||
|
||||
Quote:
Just as a note, the Moyer manifold is "Ambidextrous". It has ports on both ends, and comes with a close-off plate that will fit on either end, so it can be installed on either direct-drive or V-drive systems.
__________________
@(^.^)@ Ed 1977 Pearson P-323 "Dolce Vita" with rebuilt Atomic-4 |
The Following User Says Thank You to edwardc For This Useful Post: | ||
Administrator (06-12-2020) |
#4
IP: 45.48.80.165
|
||||
|
||||
Great info explains alot. Glad I didn't build the exhaust the way I originally thought bending back around the engine lol.
|
#5
IP: 45.48.80.165
|
||||
|
||||
I got it right on there with the boats current exhaust system. Thanks guys, slapped it right on there.
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Exhaust system size | ndutton | Exhaust System | 74 | 03-03-2022 04:24 PM |
New exhaust system | jsedivy | Exhaust System | 11 | 08-01-2011 07:50 PM |
Elevated Exhaust Back Pressure | 76oDay | Exhaust System | 9 | 04-19-2010 08:13 AM |
Stuck #4 Exhaust Valve: A special Tartan 30 problem? | jellisfeingold | Tartan | 7 | 12-09-2006 03:11 PM |