#1
IP: 73.149.87.20
|
|||
|
|||
water in the oil
water leaking into the valve chamber thru a small hole in between the valve springs. I spoke to Ken at moyer he was very informative Ken recommended that I use a drill and a 1/8 npt tap then install a npt brass plug.he said I'll only get one shot at this, I'm posting this to see if anyone in the group has done this and if you have any advice
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Winterizing A4 and General Boat Preparation | Mo | General Maintenance | 85 | 11-05-2021 06:26 AM |
atomic 4 - 6 months of salt water - lost cause? | taylor | Overhaul | 35 | 01-30-2021 10:32 PM |
Head Removal rabbit hole | Hiker_00 | Overhaul | 49 | 12-04-2012 11:33 PM |
acid flush of Fresh water cooled engine | skhorleb | Cooling System | 1 | 01-16-2007 10:07 AM |
Much much water in Atomic 4 | seators | Cooling System | 3 | 08-10-2006 03:31 PM |