#1
IP: 50.92.238.107
|
|||
|
|||
gasket pdf?
I know I have it somewhere but cannot find the pdf that explains which gaskets go on dry, which wet, etc. Can anyone point me to that, please?
__________________
Marty 1967 Tartan 27 Bowen Island, BC |
#2
IP: 70.186.210.78
|
||||
|
||||
Here it is.
__________________
Pearson 10M Gloucester, Va |
The Following 4 Users Say Thank You to Tim For This Useful Post: | ||
#3
IP: 96.244.11.68
|
|||
|
|||
Wish I had this while assembling my motor. I had to pull several components apart and put sealer on the gaskets, when the leaks started. The Moyer manual does a rairly good job of telling you to seal some of these though.
__________________
Steve Demore S/V Doin' It Right Pasadena, MD |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Main jet cover gasket source | lhbradley | Fuel System | 7 | 10-07-2014 04:33 PM |
thermostat installation with new MMI Gasket.... | jsutphen | Cooling System | 2 | 05-20-2012 05:39 PM |
Water in Cylinders, Blown Head Gasket | edwardc | Troubleshooting | 37 | 10-01-2010 05:13 PM |
Engine will not run below 2000 rpm! | SailorT | Fuel System | 4 | 01-10-2010 11:43 AM |
5 bolt gasket on a 4 bolt carb? | sastanley | Fuel System | 5 | 12-03-2008 01:22 PM |