I have one complete "parts engine" (including block, starter motor, manifold and carb) and a second engine in parts minus the block and manifold. Both include the transmission. One transmission is direct drive and the second transmission has a 2:1 reduction drive attached.
The block of engine number 1 will probably have to be sleeved (LA Sleeve has the new cylinder sleeves, T209, that will fit the Atomic 4 block. There are also two hairline cracks about 1.5 inches long on the lower lands----one between cylinders 1 and 2 and the other between 3 and 4. Pinning or fish plating these should suffice.
I also have extra carbs and water pumps.
I will sell as a set or in parts--your choice. Please make any reasonable offer.
Reply or PM for more details on the individual parts. I have included pictures of some of the parts and block but there are more parts in boxes lurking in my garage.
Thanks,
Bruce
The block of engine number 1 will probably have to be sleeved (LA Sleeve has the new cylinder sleeves, T209, that will fit the Atomic 4 block. There are also two hairline cracks about 1.5 inches long on the lower lands----one between cylinders 1 and 2 and the other between 3 and 4. Pinning or fish plating these should suffice.
I also have extra carbs and water pumps.
I will sell as a set or in parts--your choice. Please make any reasonable offer.
Reply or PM for more details on the individual parts. I have included pictures of some of the parts and block but there are more parts in boxes lurking in my garage.
Thanks,
Bruce
Comment