Return to the home page...

Go Back   Moyer Marine Atomic 4 Community - Home of the Afourians > Discussion Topics > The Wish List

Reply
 
Thread Tools Display Modes
  #1   IP: 72.215.169.82
Old 07-05-2008, 09:45 PM
duncan59
Guest
 
Posts: n/a
Hinged reversing assembly plate!

I am so sick and tired of taking my reversing assembly lid off (cramped conditions, the usual) that I would love a hinged lid that would just pop open and latch down opposite the hinge. We could then tighten up four short (3/8" long) bolts into the holes when all adjustements were done for good measure. At present, you can't work on your reversing assembly without bolting the lid down. And unbolting it. And bolting it down. And lets not forget getting all the grounding terminals connected each time.
Reply With Quote
  #2   IP: 71.232.145.132
Old 11-10-2009, 05:01 PM
ArtJ ArtJ is offline
 
Join Date: Sep 2009
Posts: 2,177
Thanks: 221
Thanked 65 Times in 50 Posts
Removable plug in reversing cover for oil changes

I would like to see the reversing cover available with a threaded 3/4 inch
tapped and removable plug for ease of oil change without removing the cover and causing \
possible gasket leaks.
Reply With Quote
  #3   IP: 142.68.253.180
Old 11-11-2009, 05:58 AM
rigspelt's Avatar
rigspelt rigspelt is offline
Afourian MVP
 
Join Date: May 2008
Posts: 1,187
Thanks: 0
Thanked 19 Times in 17 Posts
Quote:
Originally Posted by duncan59 View Post
And lets not forget getting all the grounding terminals connected each time.
I got all the ground connections off the engine except one main ground cable, and ran other grounds to a ground buss bar. Solved a lot of problems.
__________________
1974 C&C 27
Reply With Quote
  #4   IP: 64.231.125.40
Old 11-11-2009, 02:37 PM
67c&ccorv's Avatar
67c&ccorv 67c&ccorv is offline
Afourian MVP
 
Join Date: Dec 2008
Location: London, ON
Posts: 1,559
Thanks: 4
Thanked 9 Times in 9 Posts
Quote:
Originally Posted by rigspelt View Post
I got all the ground connections off the engine except one main ground cable, and ran other grounds to a ground buss bar. Solved a lot of problems.
Same here.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Reversing assembly on Elm Street duncan59 Reversing Gear 3 07-07-2008 05:49 PM
Breaker Plate - PerTronix swokrams Ignition System 2 12-17-2007 07:42 AM
reversing gear assembly gilbert landin Overhaul 2 12-06-2005 11:02 PM
Water Jacket Side Plate Leak 1973 Ericson Cooling System 5 11-09-2005 10:43 PM


All times are GMT -4. The time now is 05:03 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.


Universal® is a registered trademark of Westerbeke Corporation

Copyright © 2004-2024 Moyer Marine Inc.

All Rights Reserved