#1
IP: 204.38.60.65
|
|||
|
|||
Low speed issue - Atomic 2
I have an Atomic 2 installed in a 29 foot sailboat. The basic problem is low speed running. I have experimented with this quite a bit and am having trouble getting a consistent idle. At increased RPMs all runs fine. The choke setting for start seems to be particulalrly sensitive. It has a magneto which I believe is working properly. The engine starts and will operate fine at higher speeds.
Does anyone know how much compression (in inches) there should be? I guess it would be about the same for an Atomic 4. Thanks in advance for any assistance you can provide. -- Fred Joyal |
#2
IP: 204.38.22.4
|
|||
|
|||
Compression for Atomic 2
OOps - I should be asking for compression in pounds (lbs).
Thanks. -- Fred Joyal |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Engine Squeal at speed | eriesailor | Troubleshooting | 20 | 09-11-2010 02:15 PM |
Tach for Atomic 4 | crinan | General Interest | 2 | 11-12-2004 09:40 PM |