Tweet
Starting Issue Electrical
Default Electrical Starting Issue
1994 Mercury mariner 115 Hp. Replaced Stator, trigger, solenoid, (starter less than year old) battery cables, battery, fuel/water separator, primer bulb with fuel line and cleaned connections. Started right up and stayed running for good 15 minutes. Tried a hour later turned key nothing just a click from solenoid and no trim either. Multi meter tested and a full 12v going to bottom terminal on solenoid no reading on top terminal or side terminals on solenoid. Is it possible a new solenoid can blow? Bad ground wire?
I by new OEM parts from a marine parts store.
1994 Mercury mariner 115 Hp. Replaced Stator, trigger, solenoid, (starter less than year old) battery cables, battery, fuel/water separator, primer bulb with fuel line and cleaned connections. Started right up and stayed running for good 15 minutes. Tried a hour later turned key nothing just a click from solenoid and no trim either. Multi meter tested and a full 12v going to bottom terminal on solenoid no reading on top terminal or side terminals on solenoid. Is it possible a new solenoid can blow? Bad ground wire?
I by new OEM parts from a marine parts store.