#1
IP: 166.102.89.194
|
|||
|
|||
Throtle and Clutch controls
I have the old controls down low in the cockpit. They are stuck together, rust i suspect. Any guidance on how to remove would be a big help as there is no obvious screw or nut.
Thanks |
#2
IP: 146.197.246.30
|
|||
|
|||
I do not know what your controls are like, but my shift control is bolted in from the inside of the boat, not the outside. So to remove it, I would need to unbolt it from inside the boat. Perhaps yours are the same?
|
#3
IP: 64.252.192.206
|
||||
|
||||
Not knowing what you have, I hesitate to advise. Could you perhaps submit a picture? Is it a two handle, throttle & shift unit? Perhaps an old Marmac unit? If so, I can tell you how it comes apart. You might even get that thing working again!
|
#4
IP: 166.102.89.194
|
|||
|
|||
Thanks much.
Ill get pics this weekend and post them |
Thread Tools | |
Display Modes | |
|
|