Return to the home page...

Go Back   Moyer Marine Atomic 4 Community - Home of the Afourians > Discussion Topics > Troubleshooting

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1   IP: 99.192.82.82
Old 09-06-2018, 01:58 PM
irtrimble irtrimble is offline
Senior Member
 
Join Date: Oct 2004
Posts: 31
Thanks: 0
Thanked 3 Times in 1 Post
help with compression

Engine won't start, of course. i probably cranked it too long with water intake open. When I check compression, no compression on cylinders 1 and2, a trace in cylinder 3, and good compression in 4 but spit out a lot of water. Head gasket vs flooded manifold? I closed water intake, put some lightweight oil in all cylinders, cranked it some, and am letting it sit. Any ideas?
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Valid Compression Test jkenan Troubleshooting 11 12-18-2013 09:14 PM
Another Low Compression Issue Triton106 Troubleshooting 19 09-19-2011 09:27 AM
Compression test and general questions mpahl Overhaul 6 03-22-2011 02:20 PM
High Compression? Kurt General Maintenance 4 06-17-2008 03:42 PM
Compression - Good enough, or Not High Hopes Overhaul 2 06-06-2008 10:29 PM


All times are GMT -4. The time now is 09:27 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.


Universal® is a registered trademark of Westerbeke Corporation

Copyright © 2004-2024 Moyer Marine Inc.

All Rights Reserved