remove cylinder block for inspection/cleaning

[splashlog]

I want to take the cylinder block off to get it measured and hot tanked. How do I remove it in the most efficiant way. It's off the boat and on a bench.
If I had a removal sequnce, that would be most awesome.

[Ando]

I just tore into it
I did however make notes, took lots of pics and arraigned the lifters and springs in order from 1-8 from flywheel to aft.
I'm sure a more learned approach will by posted for you soon. Good luck and have fun!

[edwardc]

Buy the Moyer manual! It will cover what you need to know.