Return to the home page...

Go Back   Moyer Marine Atomic 4 Community - Home of the Afourians > Discussion Topics > Reversing Gear

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1   IP: 172.58.229.181
Old 03-31-2019, 12:11 PM
Siobhan Siobhan is offline
Frequent Contributor
 
Join Date: Mar 2019
Location: About.
Posts: 8
Thanks: 0
Thanked 0 Times in 0 Posts
Oil leak from between oil seal retainer and bearing housing

Hi! Irwin 27, new to us ‘67 A4, fitting it in on new stringers and engine mounts.

After our first test fit, with the aft of the engine lower, we noticed an oil leak out of the bottom of the back of the engine- where the oil seal retainer articulates to the bearing housing oil pan and oil pan. The transmission on this A4 came from a different engine, something went wrong with the original when the guy who sold it to us was testing it.

I’m wondering if I have to replace the oil seal or if it is possible just to replace the bearing housing gasket. It also looks like it may be coming from the lowest of the bolts holding the oil seal retainer in place. Ideas?
Attached Images
 
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:45 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.


Universal® is a registered trademark of Westerbeke Corporation

Copyright © 2004-2024 Moyer Marine Inc.

All Rights Reserved