#1
IP: 72.68.129.89
|
|||
|
|||
fuel line tank to filter
I'm replacing most of my fuel system (pump, carb, etc) on my Tartan 34C. There is what appears to be a heavily insulated and jacketed steel (likely copper) fuel line from the tank to the primary filter. I reviewed some of the ABYC standards and also the specifications of the rubber fuel hose offered on this site by Don. Can anyone give me a reason not to replace this solid fuel piping with new rubber hose?
Thank you. KSturmann |
#2
IP: 207.200.116.133
|
|||
|
|||
nope
rubber is better no cracking from vibration . fair winds ken
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Engine won't start and I'm at my wits-end | ChicagoNewport27 | Troubleshooting | 64 | 07-23-2011 12:47 AM |
Fuel-Related Engine Shutdowns | Don Moyer | Fuel System | 32 | 02-18-2011 04:36 PM |
Fuel tank flush? Fuel deliver problems. | SimonP | Fuel System | 13 | 10-02-2008 05:22 PM |
Fuel line design, possible sand in tank | bputney | Fuel System | 12 | 05-15-2007 01:57 PM |
In Line Fuel Filter | cduer | Fuel System | 1 | 02-26-2007 07:15 AM |