Seapadrik's Overhaul Thread

[seapadrik]

Hey,

I have asked alot of questions and you all have been kind enough to answer, I figured I would create a thread as a place mark for my rebuild project. As I am actully getting to the "build" part of the rebuild. I will have plenty of questions for the group.

But first some pictures. Here are some photos over the last few days where i took my block and began assembling some of those parts I have ordered from MM.

new MAINS and Journals, New pistons and rings, new valves and springs, rebored cylinders and reground crankshaft.

Cheers,

[Al Schober]

Re: the photo of the piston & conn rod. You need a bit more grime under your fingernails. Looking like a first class job.

Al