#1
IP: 64.52.40.26
|
|||
|
|||
Temperature alarm questions
After overheating my engine I am looking at an audible alarm, because I'm too dumb to look at a dial. The Kit sold here has a 3/8 inch switch is this supposed to replace the sensor going to the dial or does it go somewhere else along the coolant system? Same with the oil pressure switch, I have a low pressure switch controlling the fuel pump does the kits switch replace that or something else? I like having the gauges but periods of inattention have gotten me in trouble.
Thanks |
#2
IP: 166.137.88.168
|
||||
|
||||
Keep the temp and oil senders that you have. Add the new alarm switches where you can. This often requires installing a tee fitting somewhere.
__________________
Jeff Taylor Baltic 38DP |
#3
IP: 96.234.69.69
|
|||
|
|||
Quote:
Check out the COLE HERSEE LOW OIL PRESSURE, HIGH ENGINE TEMP ALARM. MM sells it but go online for a better price. I believe I got mine on E-Bay for $35.00 Regards Bill |
#4
IP: 166.137.88.143
|
||||
|
||||
The MMI kit is the same CH product but also includes the fittings you will need to install it (tees etc. ). That's why the price is a little higher.
__________________
Jeff Taylor Baltic 38DP |
#5
IP: 64.52.40.26
|
|||
|
|||
Thanks, I'll get the Moyer Kit
|
#6
IP: 99.248.188.210
|
|||
|
|||
You won't be disappointed......and you'll love the peace of mind it brings
Cheers Jimmy
__________________
Jimmy C&C 29 MK1 Erieau , Lake Erie |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Controlling and affecting proper operating temp | ILikeRust | Troubleshooting | 88 | 02-02-2016 01:36 PM |
Temp and oil pressure alarm | ndutton | Ignition System | 11 | 09-23-2009 04:52 PM |
Temperature gauge problems? | omec | Cooling System | 0 | 07-16-2007 12:37 PM |
Exhaust Temperature Alarm | raleighm | Exhaust System | 0 | 03-06-2007 08:10 AM |
installed alarms now engine temp not right | eric 352 | General Interest | 8 | 01-21-2005 11:33 AM |