Tweet
Joe, using copper 1/8 tubing works great. Install it with a "vibration" loop and use a minimum of 2 feet for dampening.
Mine would idle all day and did for 7 hours once at 700 and I had the PCV valve installed too, no hick-ups just putted away.
Timing 0*, EI,PCV,dist c-adv set too 17*@1600, J4J Champion plugs gapped to .042" and a slightly modified carb.
Dave Neptune
Mine would idle all day and did for 7 hours once at 700 and I had the PCV valve installed too, no hick-ups just putted away.
Timing 0*, EI,PCV,dist c-adv set too 17*@1600, J4J Champion plugs gapped to .042" and a slightly modified carb.
Dave Neptune
Comment