#1
IP: 136.182.158.145
|
|||
|
|||
What shift/throttle control?
As some of you might remember, I bought a Chinese clone of my Morse control because the shift lever would slip on the shaft making it impossible to have a reliable control. When I first hunted for a replacement I found it listed at around $550. Now I see it for significantly less (but still $$$), although it doesn't look exactly like my old control with threaded rod and round knobs for handles. This looks more like the Chinese clone I tried.
http://www.discountmarinesupplies.co...B_CONTROL.html I'm wondering what control you have in your boats (side cockpit mounted). Is there any lower cost alternative that's still strong enough to handle the shifting force of the A4? The Chinese clone isn't, plus the innards have corroded in two seasons even in fresh water. I'm thinking it might be better to make one with stainless mechanical tubing, but that would be a big project too. Thanks, Jim |
#2
IP: 12.47.208.50
|
|||
|
|||
Years ago I purchased a replacement set like this from a pile of surplus from Minney's.
www.minneysyachtsurplus.com I didn't know what I was doing; it wasn't the right size; I sold it on eBay a few years ago for a slight profit (non-inflation-adjusted). Might they have a new or used replacement for you? |
#3
IP: 129.188.69.129
|
|||
|
|||
Thanks,
I wrote to Minney's and they said they don't have any controls at this time. I got lucky on ebay though and found an original from a Columbia 30. Jim |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Clutch / Throttle Options? | LaBonneVie | General Interest | 16 | 01-26-2010 07:04 PM |
new person needs help | tacar | Troubleshooting | 8 | 06-18-2007 11:07 AM |
Shift/Throttle search | raleighm | General Interest | 0 | 05-30-2007 04:49 PM |
shift/throttle mechanism | PatrickH | General Interest | 0 | 05-03-2007 03:03 PM |
single lever engine control? | Unregistered | General Interest | 2 | 04-12-2005 07:50 PM |