Return to the home page...

Go Back   Moyer Marine Atomic 4 Community - Home of the Afourians > Owner Discussion Groups > Discussion Groups > Catalina

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1   IP: 207.81.177.73
Old 12-31-2007, 07:40 PM
Overspendin' Overspendin' is offline
Senior Member
 
Join Date: Oct 2006
Posts: 46
Thanks: 0
Thanked 0 Times in 0 Posts
Controls are reversed

I have a very early C30. At some point a Yacht Specialties wheel and pedestal were installed, thereby relocating the engine controls from the coaming to either side of the wheel, transmission on the left and throttle on the right.
My problem is that the controls are reversed, pushing forward on the shifter engages reverse, pulling back puts it into forward.
The throttle is the same, forward slow, back fast.
The previous owner suggested it was set up this way to back the boat into the slip easier???
I haved learned to live with the setup although it made for a few interesting moments in the marina when we first got the boat.
I now have the time to rectify the situation.
The obvious solution of swapping the connections at the pedestal is not an option.
Short of installing a new Edson pedestal, levers and brackets in the engine compartment seem to be the only solution.
Has anybody out there encountered this before?
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Bushings for Teleflex MJB Throttle/Shifter Dual Lever Engine Controls ??? 1973 Ericson General Maintenance 1 12-16-2005 11:51 PM


All times are GMT -4. The time now is 08:29 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.


Universal® is a registered trademark of Westerbeke Corporation

Copyright © 2004-2024 Moyer Marine Inc.

All Rights Reserved