Simple carb
AFisch, one thing for sure is that Palmer did not develop their own carb!! It is probably a single barrel held on with two flange bolts/studs, the cables and a fuel line.
Take a picture of the carb or remove it and take a few pics. The make and model number should be on the carb FOR EASY REFERANCE.
I would not doubt it being a Zenith as they were quite common for marine and farm use on many engines. A kit should not be an issue and perhaps the Palmer boyz know which carb you have and what kit is required, worth a check.
Do not trade in your carb yet, will get to why later if you go further.
I strongly recommend if you get some pics that you start a new Palmer thread to simplify our Afourian efforts.
Dave Neptune
AFisch, one thing for sure is that Palmer did not develop their own carb!! It is probably a single barrel held on with two flange bolts/studs, the cables and a fuel line.
Take a picture of the carb or remove it and take a few pics. The make and model number should be on the carb FOR EASY REFERANCE.
I would not doubt it being a Zenith as they were quite common for marine and farm use on many engines. A kit should not be an issue and perhaps the Palmer boyz know which carb you have and what kit is required, worth a check.
Do not trade in your carb yet, will get to why later if you go further.
I strongly recommend if you get some pics that you start a new Palmer thread to simplify our Afourian efforts.
Dave Neptune
Comment