#12
IP: 97.93.70.7
|
|||
|
|||
Simple carb
AFisch, one thing for sure is that Palmer did not develop their own carb!! It is probably a single barrel held on with two flange bolts/studs, the cables and a fuel line.
Take a picture of the carb or remove it and take a few pics. The make and model number should be on the carb FOR EASY REFERANCE. I would not doubt it being a Zenith as they were quite common for marine and farm use on many engines. A kit should not be an issue and perhaps the Palmer boyz know which carb you have and what kit is required, worth a check. Do not trade in your carb yet, will get to why later if you go further. I strongly recommend if you get some pics that you start a new Palmer thread to simplify our Afourian efforts. Dave Neptune |
The Following User Says Thank You to Dave Neptune For This Useful Post: | ||
AFisch (11-18-2019) |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Questions about Racor filter | Baltimore Sailor | Fuel System | 12 | 01-19-2010 09:04 AM |
Alternator Questions | Rick_Powers | Electrical | 9 | 08-16-2009 05:01 PM |
Palmer P60 out and ready to be sold... | Amorita34 | For Sale - Engines and Engine Parts | 1 | 02-27-2009 09:51 AM |
a couple of random questions | superdave474 | General Interest | 1 | 08-18-2008 08:08 AM |
couple overhaul questions for the experts | superdave474 | Overhaul | 5 | 05-05-2008 07:35 PM |