Return to the home page...

Go Back   Moyer Marine Atomic 4 Community - Home of the Afourians > Discussion Topics > Troubleshooting

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1   IP: 72.205.69.26
Old 07-08-2019, 10:49 AM
Yankee30 Yankee30 is offline
Frequent Contributor
 
Join Date: Jul 2019
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
A Tale of Two Problems...

Hello there!

Issue: In neutral and in Reverse I get normal rev and oil pressure, just not in forward gear.

New Plugs
New Ignition Coil
Compression Test after about 10min running (95 - 96 - 95 - 100)
New Racor Fuel Filter
Oil Change
New Carb (installing now)
Checked Exhaust Aft from Engine

The Throttle Lever on the new Carb is oriented differently than the one the old carb. With my cable configuration (Coming to engine from aft - no u-turn) The cables are not oriented to push throttle open and pull closed.

The old carb has a Throttle Arm which was oriented differently supporting the normal functioning of my throttle cable.

Questions:

1.) Any other things you would look at regarding the power issue in Forward Gear?
2.) Can I use the old throttle arm from original and new plate and screws? (it seems to fit the same and solves the issue)
3.) Is there a way to invert the throttle arm which came with the new Zenith. I can't find a way to flip it.
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Transmission Problems are continuing. brian6622 Troubleshooting 5 05-31-2016 10:56 AM
New Atomic owner with problems filbert99 Troubleshooting 5 07-21-2015 02:14 AM
Fuel tank flush? Fuel deliver problems. SimonP Fuel System 13 10-02-2008 05:22 PM
Overheating problems jdaly986 Cooling System 1 01-16-2008 10:32 AM
gas line problems??? Unregistered Troubleshooting 3 06-19-2006 09:25 PM


All times are GMT -4. The time now is 05:11 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.


Universal® is a registered trademark of Westerbeke Corporation

Copyright © 2004-2024 Moyer Marine Inc.

All Rights Reserved