Return to the home page...

Go Back   Moyer Marine Atomic 4 Community - Home of the Afourians > Discussion Topics > Troubleshooting

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1   IP: 172.249.104.171
Old 07-08-2018, 11:24 AM
CamaroMan CamaroMan is offline
 
Join Date: Oct 2017
Location: San Pedro, CA
Posts: 42
Thanks: 3
Thanked 10 Times in 5 Posts
plugs wet with fuel / add stat / hotter plugs?

(posting for some1 else)

late model - tstat was missing. Recently cleaned alot of crud out of block. Motor runs fine hours on end, but plugs wet with fuel / struggles to start after running.

I blocked off the bypass hose since there was no tstat installed but im thinking the motor is running too cold -

I suggest running a range or 2 hotter plug and/or installing the stat..

otherwise everything runs gr8 - starts instantly and all ignition components new-
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Polishing Filter GregH Fuel System 27 05-05-2018 11:43 PM
Engine runs for a couple minutes, stops hard, no fuel flow pdecker Troubleshooting 30 05-28-2015 01:17 PM
Hotter plugs redux HalcyonS Ignition System 2 01-03-2014 09:15 AM
Fuel Shutdown Issue gdasw Fuel System 17 06-20-2013 08:53 AM
Engine won't start and I'm at my wits-end ChicagoNewport27 Troubleshooting 64 07-23-2011 12:47 AM


All times are GMT -4. The time now is 12:15 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.


Universal® is a registered trademark of Westerbeke Corporation

Copyright © 2004-2024 Moyer Marine Inc.

All Rights Reserved