Return to the home page...

Go Back   Moyer Marine Atomic 4 Community - Home of the Afourians > Discussion Topics > Drive Train / Propellers

Reply
 
Thread Tools Display Modes
  #1   IP: 73.19.60.36
Old 05-31-2019, 08:27 PM
Boat Boat is offline
Senior Member
 
Join Date: Aug 2014
Location: Kirkland, WA
Posts: 121
Thanks: 0
Thanked 5 Times in 5 Posts
Max - Prop anyone?

Anyone using a maxprop on their A4? Looking for sailing performance and some, well, ALOT better reverse. running a 11x7 3 blade now. i was concerned that the freakin shaft always turns albiet slowly when in neutural. anyone running a different transmission? like a hurth or similar?
__________________
'69 Newport 30 MKI Hull #20
Reply With Quote
  #2   IP: 97.93.70.7
Old 06-01-2019, 09:16 AM
Dave Neptune Dave Neptune is online now
Afourian MVP
 
Join Date: Jan 2007
Location: Lake Arrowhead Ca.
Posts: 3,937
Thanks: 394
Thanked 335 Times in 232 Posts
The shaft turning in neutral is just the nature of these transmissions.

What is the worry? And how do you think a different prop will help the turning in neutral.

I ran the Indigo prop mostly for reverse "control" while backing. Really helped over the 2 blade.

Dave Neptune
Reply With Quote
  #3   IP: 73.19.60.36
Old 06-01-2019, 11:34 AM
Boat Boat is offline
Senior Member
 
Join Date: Aug 2014
Location: Kirkland, WA
Posts: 121
Thanks: 0
Thanked 5 Times in 5 Posts
Aww, I dont think I asked my question very well. Ill try again. Im not thinking that a different prop will stop the turning of the shaft. Im aware that it will somewhat and is the nature of the transmission.

With the turning of the shaft, the blades will turn on the maxprop, causing it to not be in a feathered position. I dont mind any way except for when docking and etc. i was wondering what guys experience was with it
__________________
'69 Newport 30 MKI Hull #20
Reply With Quote
  #4   IP: 97.93.70.7
Old 06-01-2019, 02:16 PM
Dave Neptune Dave Neptune is online now
Afourian MVP
 
Join Date: Jan 2007
Location: Lake Arrowhead Ca.
Posts: 3,937
Thanks: 394
Thanked 335 Times in 232 Posts
Are you talking about freewheeling in neutral under sail? If so just put it in forward and she'll stop spinning. I never let my Indigo freewheel and barely even noticed it was there.

Dave Neptune
Reply With Quote
  #5   IP: 73.19.60.36
Old 06-01-2019, 11:26 PM
Boat Boat is offline
Senior Member
 
Join Date: Aug 2014
Location: Kirkland, WA
Posts: 121
Thanks: 0
Thanked 5 Times in 5 Posts
no, not that. right now I dont mind the freewheel under sail. i think it is less drag than locked. Im referring to the freewheeking in neutral like when you are docking and maneuvering.
__________________
'69 Newport 30 MKI Hull #20
Reply With Quote
  #6   IP: 97.93.70.7
Old 06-02-2019, 10:26 AM
Dave Neptune Dave Neptune is online now
Afourian MVP
 
Join Date: Jan 2007
Location: Lake Arrowhead Ca.
Posts: 3,937
Thanks: 394
Thanked 335 Times in 232 Posts
Why would freewheeling be a problem in docking? There is no real power being delivered to the shaft, just the friction of the unit which is easily stoped by hand.

OR your reverse band is to tight. Neutral is not an actual POINT in the shifter just where the clutches are loose. It is the rotating friction that drives the shaft and like I said with very little power for unwanted thrust in either direction.

Dave Neptune
Reply With Quote
  #7   IP: 70.185.132.167
Old 06-02-2019, 12:08 PM
JOHN COOKSON JOHN COOKSON is online now
Afourian MVP
 
Join Date: Nov 2008
Posts: 3,051
Thanks: 36
Thanked 519 Times in 398 Posts
Quote:
Originally Posted by Dave Neptune View Post
OR your reverse band is to tight. Neutral is not an actual POINT in the shifter just where the clutches are loose. It is the rotating friction that drives the shaft and like I said with very little power for unwanted thrust in either direction.
Dave Neptune
Finding neutral on an A4 can be elusive.

Take the cable off the shift lever at transmission then shift by hand using the trany shift lever to see if you can find neutral. If you can find neutral by doing this then try adjusting the shift cable. It may not be where you think it should be when the cockpit shift lever is in a certain position.

If you can't find neutral with the cable disconnected then you will need an adjustment inside the transmission as noted above.

If you can't find neutral at all you will eventually get used to docking and slow speed maneuvering while the prop is very slowly turning.

TRUE GRIT
Reply With Quote
The Following User Says Thank You to JOHN COOKSON For This Useful Post:
Dave Neptune (06-02-2019)
  #8   IP: 137.200.32.54
Old 06-04-2019, 06:53 AM
joe_db's Avatar
joe_db joe_db is offline
 
Join Date: May 2009
Posts: 3,312
Thanks: 46
Thanked 360 Times in 270 Posts
Is there any such thing as a MaxProp for a direct drive A4?
Reply With Quote
  #9   IP: 45.46.251.32
Old 06-04-2019, 10:21 AM
alcodiesel's Avatar
alcodiesel alcodiesel is offline
Senior Member
 
Join Date: Oct 2015
Location: Norfolk, VA
Posts: 220
Thanks: 23
Thanked 44 Times in 35 Posts
I have a Max Prop. Came with the boat. 2 Blade. I think it works great. Very good reverse. Direct drive.
__________________
Bill McLean
'76 Ericson 27
:valhalla:
Norfolk, VA
Reply With Quote
  #10   IP: 73.19.60.36
Old 06-07-2019, 12:46 PM
Boat Boat is offline
Senior Member
 
Join Date: Aug 2014
Location: Kirkland, WA
Posts: 121
Thanks: 0
Thanked 5 Times in 5 Posts
Quote:
Originally Posted by alcodiesel View Post
I have a Max Prop. Came with the boat. 2 Blade. I think it works great. Very good reverse. Direct drive.
i am looking at a three blade. Current and etc here in the puget sound im thinking i need a little more power when motoring. Do you still habe good power with the two blade?
__________________
'69 Newport 30 MKI Hull #20
Reply With Quote
  #11   IP: 76.92.209.59
Old 06-09-2019, 01:29 PM
pcupach pcupach is offline
Member
 
Join Date: Jan 2018
Posts: 4
Thanks: 0
Thanked 3 Times in 2 Posts
Max Prop

Take a look in the thread Titled: "Max Prop 3 Blade 12" prop.

I've had no problems with the Max prop and it has performed flawlessly. Plenty of torque to move the Ranger 33 with an old Atomic 4.
Reverse is like driving a car...point and go. Prop walk is all but eliminated. Now that does not account for wind influencing the entire movement of the boat.
Reply With Quote
  #12   IP: 45.46.251.32
Old 06-09-2019, 04:17 PM
alcodiesel's Avatar
alcodiesel alcodiesel is offline
Senior Member
 
Join Date: Oct 2015
Location: Norfolk, VA
Posts: 220
Thanks: 23
Thanked 44 Times in 35 Posts
It'll drive my boat when clean- no current or wind to a shade over 6kts wot. 2100rpm I think.
Reverse is good- lots of walk- but I use that to my advantage.
__________________
Bill McLean
'76 Ericson 27
:valhalla:
Norfolk, VA
Reply With Quote
  #13   IP: 73.19.60.36
Old 06-14-2019, 12:32 AM
Boat Boat is offline
Senior Member
 
Join Date: Aug 2014
Location: Kirkland, WA
Posts: 121
Thanks: 0
Thanked 5 Times in 5 Posts
Quote:
Originally Posted by alcodiesel View Post
It'll drive my boat when clean- no current or wind to a shade over 6kts wot. 2100rpm I think.
Reverse is good- lots of walk- but I use that to my advantage.
do you have a maxprop? i have a three blade, not sure if its an indigo or not. 30 ft newport and i get 6.5kn at 2200 but, my reverse is freakin worthless
__________________
'69 Newport 30 MKI Hull #20
Reply With Quote
  #14   IP: 68.0.42.244
Old 06-14-2019, 07:44 AM
indigo indigo is online now
 
Join Date: Jun 2007
Location: Williamsburg, VA
Posts: 26
Thanks: 6
Thanked 22 Times in 12 Posts
Reverse

Be sure to keep pressure on the shift lever when in reverse as there is no detent like there is in forward.

Also, don’t be afraid to give the A4 lots of RPM in reverse. The tyranny is noisy in reverse but that is just the way they are.

You should be able to get respectable Astern thrust.

Tom
Reply With Quote
  #15   IP: 107.77.97.80
Old 06-15-2019, 12:12 PM
lat 64's Avatar
lat 64 lat 64 is offline
Afourian MVP
 
Join Date: Oct 2008
Location: Fairbanks, Alaska
Posts: 1,874
Thanks: 25
Thanked 156 Times in 103 Posts
One man's solution to reverse issues

Old school. No issues with Bernouli principle failing at cavitation.
https://r2ak.com/2019-teams-full-race/team-r2ache/
Attached Images
 
__________________
Whiskeyjack a '68 Columbia 36 rebuilt A-4 with 2:1

"Since when is napping doing nothing?"

Last edited by lat 64; 06-16-2019 at 12:45 PM. Reason: spaellin'
Reply With Quote
The Following User Says Thank You to lat 64 For This Useful Post:
GregH (06-17-2019)
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Max Prop 3 Blade 12" prop pcupach Drive Train / Propellers 15 07-14-2018 10:03 PM
It started as a simple Cutless bearing replacement... cdhickey Drive Train / Propellers 8 05-02-2015 12:48 PM
So - pros versus cons re: Indigo prop? ILikeRust Drive Train / Propellers 19 07-09-2013 03:15 PM
prop performance baileyem General Interest 3 06-07-2007 09:30 PM
Prop effect on A4 Performance raleighm Drive Train / Propellers 2 04-29-2005 11:47 AM


All times are GMT -4. The time now is 03:16 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2019, vBulletin Solutions, Inc.


Universal® is a registered trademark of Westerbeke Corporation

Copyright © 2004-2019 Moyer Marine Inc.

All Rights Reserved