#1
IP: 172.58.139.46
|
|||
|
|||
Lower water pump extendo bolt alternative?
Will this work? Or why won't this work as a long bolt for the lower hole of the water pump?
This is a 4 1/2" grade 5, 3/8-16 bolt with a nut tightened/bottomed on the threads. This is cheap at less than $2.00. Which is good since I can keep a couple on the boat so when I drop it into the bilge, I can simply put in a second $2.00 replacement. Getting to that lower bolt with the original short bolt is torture in a Pearson 10M. Especially when the engine is hot and the cabin temp is 90+ degrees. Dave |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Leaking MMI Water Pump | Bruce A | Cooling System | 5 | 08-24-2011 12:25 PM |
Oberdorfer water pump impeller replacement | CalebD | General Maintenance | 0 | 04-05-2010 01:10 PM |
Leaking water pump | Jesse Delanoy | Cooling System | 8 | 08-13-2009 02:53 PM |
Noisy New Water Pump | Bruce A | Cooling System | 7 | 10-27-2008 04:24 PM |
Extended bolt for water pump | Kemp Dawson | Cooling System | 0 | 09-15-2007 10:56 AM |