|
#1
IP: 24.19.229.135
|
|||
|
|||
adjustment nut
going to tighten my reverse nut. my reverse has gone from just ok to absolutely rediculous non existant. which way to tighten? looking afrom the back of the motor the nut is in the upper left top. i want to turn clockwise?? just want to check before i do it
__________________
'69 Newport 30 MKI Hull #20 |
#2
IP: 72.235.8.127
|
||||
|
||||
Procedure is explained in the attached doc...
These and other interesting documents can be found HERE
__________________
-Jerry 'Lone Ranger' 1978 RANGER 30 Last edited by roadnsky; 08-11-2019 at 10:16 PM. |
#3
IP: 24.19.229.135
|
|||
|
|||
Thanks, That is exactly the file i needed. i had it saved somewhere but brain farted and cpuldnt find where i put it
__________________
'69 Newport 30 MKI Hull #20 |
#4
IP: 97.93.70.7
|
|||
|
|||
Boat, just to be sure are you aware that the A-4 direct drive has no means to hold the trans in reverse other than your hand pressure and/or cable friction. Many have thought they needed an adjustment and it was just the cables "freeing" up.
Just thought I'd through this out there to be sure. Dave Neptune |
#5
IP: 32.211.28.40
|
||||
|
||||
I'm suspicious of the sudden change (loss of reverse). That cross shaft for adjusting reverse has a nut on the manifold side which is the adjustment. The other end (distributor side) has a roller that engages the cam. Make sure that roller is still there before you go any further.
|
#6
IP: 24.19.229.135
|
|||
|
|||
thanks for the replies, i have had the boat for 6 years. the reverse has always been not the best. i have always had to hold the handle so it is not a new thing. it just seems to me that it is getting less and less over the months. it doesnt help that i did a cruise for a few weeks on a friends beat that was equipped with a max prop. but it got me thinking that maybe it is wearing and doesnt have as much grip anymore. i have never had to adjust it before, and i read that it is uncommon to have to. but the motor has 716 hrs on it. is that alot?
__________________
'69 Newport 30 MKI Hull #20 |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Carb Adjustment Tool | gs11gk | Fuel System | 8 | 02-06-2016 09:15 AM |
Forward gear adjustment | sail_flathead_lake | Reversing Gear | 5 | 06-15-2015 01:00 PM |
Carburetor float adjustment | COB | Fuel System | 9 | 08-08-2012 11:16 AM |
Forward and Reverse Gear Adjustment Issues | CraigRun | Reversing Gear | 12 | 05-17-2012 09:15 PM |
Failed Oil Pressure Adjustment | Mark Millbauer | Troubleshooting | 5 | 11-26-2008 06:53 PM |