Hey Folks,
I ran into a slight problem this past fall when I was winterizing my A4 -
When I was removing the spark plugs to squirt some MM Oil into the cylinders, the #3 plug froze to the threaded core in the spark plug hole. So this insert came out of the spark plug hole and was frozen to the plug.
I am not sure if this threaded core (almost like a solid "helicoil") is part of the normal A4 Head, or it was a repair that someone who owned the boat prior to me made.
My questions is: Does anyone have any suggestions on how to get this part off the spark plug, and then properly secure this threaded insert back into the spark plug hole so it does not come out again.
Thanks all in advance!
-todd
I ran into a slight problem this past fall when I was winterizing my A4 -
When I was removing the spark plugs to squirt some MM Oil into the cylinders, the #3 plug froze to the threaded core in the spark plug hole. So this insert came out of the spark plug hole and was frozen to the plug.
I am not sure if this threaded core (almost like a solid "helicoil") is part of the normal A4 Head, or it was a repair that someone who owned the boat prior to me made.
My questions is: Does anyone have any suggestions on how to get this part off the spark plug, and then properly secure this threaded insert back into the spark plug hole so it does not come out again.
Thanks all in advance!
-todd
Comment