#1
IP: 24.50.150.230
|
|||
|
|||
Green engine
Hi all, I purchase this engine a few years ago with building a launch in mind. But due to having more projects that time allows , I should pass this engine to someone else. I am wondering what it is worth? It looked rebuild when I bought it , but to verify I pulled the head. It was never ran by looking at the top side , head and gaskets. The bore measures 3.250 , valves new , bore honing marks as new. I have not run it yet. Please see pictures.
I am a chris craft guy and have some experience with flat heads, but not a engine guy. I need to figure out how to post pictures. Thanks, steve |
#2
IP: 137.103.82.194
|
||||
|
||||
What is it?
|
#3
IP: 71.3.152.34
|
||||
|
||||
I am guessing that it has a center main bearing.
|
#4
IP: 100.36.89.105
|
||||
|
||||
Got it! It's a Universal Super Four. There was a thread on this model a while back in 2014:
http://www.moyermarine.com/forums/showthread.php?t=8614 In fact, based on the color and the wooden base, I'd say this is the same engine!
__________________
@(^.^)@ Ed 1977 Pearson P-323 "Dolce Vita" with rebuilt Atomic-4 Last edited by edwardc; 09-19-2017 at 10:00 AM. |
#5
IP: 24.50.150.230
|
|||
|
|||
Pictures
Hi All, Pictures of engine this morning.
steve |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
no water flow, engine overheats | shawnb | Troubleshooting | 10 | 03-30-2017 01:15 AM |
Water in crankcase - bilge flooded part way up engine | cvile1617 | Troubleshooting | 18 | 04-13-2015 08:52 PM |
Engine Sputters and Coughs, and Needed Choke to Run Smooth | CaptainChas | Troubleshooting | 9 | 06-30-2009 10:50 PM |
Engine Dies after approx one hour | Trysail | Troubleshooting | 4 | 08-07-2008 11:15 AM |